Electrical Fault Finding in Bolton

Electrical fault finding in Bolton for trip switches that keep going off, dead sockets and flickering lights. ANR Electrics tracks down the cause, fixes it and responds within 24 hours at most.

What Causes a Trip Switch to Keep Going Off?

A trip switch goes off to protect you. The most common causes are a faulty appliance, water getting into a light or socket, or a cable damaged by a nail or screw. Sometimes an old circuit is simply worn. Finding which one it is takes proper testing, not guesswork.

More Information

How We Test Each Circuit

We start by asking what happened and when. Then we switch circuits off one at a time and use test equipment to measure the cable insulation. This shows which circuit has the fault, and often where along it. With that found, we can repair only the part that needs it.

Things to Try Before You Call

Unplug everything on the circuit that tripped, then reset the switch. If it stays on, plug items back in one at a time. If it trips when one goes in, that appliance is likely the fault. If it trips with nothing plugged in, leave it off and call an electrician.

About us

ANR Electrics is a fully qualified electrician offering electrical fault finding across Bolton, Breightmet and Harwood. Faults can be hard to pin down, so we test properly rather than guess. That way we fix the real cause and you are not left with the same problem next week. Every enquiry gets a response within 24 hours at most.

  • Fully qualified electrician

  • We respond within 24 hours at most

  • Emergency callouts taken

  • Open 7am to 8pm, seven days a week

  • Homes and businesses across Bolton

Frequently Asked Questions

How much does electrical fault finding cost in Bolton?

The cost of electrical fault finding depends on how long it takes to trace the problem. A faulty appliance can be found quickly. A fault hidden in a wall or under a floor takes more testing. We explain what we have found before any repair work goes ahead.

Why do my lights flicker in my Bolton house?

Flickering lights are often caused by a loose bulb, a faulty dimmer switch or a loose connection in the fitting or switch. If several lights flicker at once, or it happens when big appliances turn on, the problem may be on the circuit. Loose connections can overheat, so get it checked.

Should I worry about a warm plug socket in Bolton?

Yes, a warm socket is a warning sign. It usually means a loose connection, a damaged socket or too much load from adaptors and extension leads. Stop using it, switch it off and unplug anything connected. Then book electrical fault finding so the cause can be found and fixed.

Our reviews